News

Home  > INFORMATIONS  > News  > 

Complete Introduction of Grey Floor Tiles

Complete Introduction of Grey Floor Tiles

2020-05-19

What is Grey Floor Tiles?

The colour grey is synonymous with cool, serene, natural colour palettes.Therefore, grey floor tiles are perfect for creating a relaxed scheme in an interior area this season. That’s exactly what you want in your bathroom, living room or bedroom; the spaces where you like to unwind at the end of a stressful day; you want a cool, calming ambience. We have a great selection of grey floor tiles to choose from; from realistic stone effects and faux woods, through to captivating Moroccan patterns and designs.


Offering style and functionality, Overland Ceramics effortlessly fuses eye-catching aesthetics with low-maintenance attributes. Constructed from hardwearing porcelain and featuring exceptional non-slip qualities, this product is suitable for indoor and outdoor use.


Key Features of Grey Floor Tiles


Authentic concrete effect


Hardwearing porcelain construction


No sealing required


Matt finish


Rectified edges for cleaner grout lines


Authentically replicating the look  of sand-based flagstones, these 800 x 800 tiles not only look great but feature a slip rating of R11, meaning they’re ideal for use in kitchens, bathrooms and commercial premises. Equally adept for use as an interior or exterior floor covering, these elegant tiles with their matt texture and hardwearing porcelain make-up gives them the perfect blend of style and functionality.


How to care Grey Floor Tiles?

In some cases polished porcelain will have a transit wax on the tile surface to prevent scratching during transportation. This transit will need to be removed using Fila First Wash Extra Strong before grouting.

Once tiles have been fitted all residues must be removed from the surface of the tile, it is important to use the correct cleaner for this.


Initial Clean (Within 30 minutes of grouting)

For removal of cementitious residues within 10-30 minutes of grouting use Fila Instant Grout Remover.


Directions for use: After grouting, wait approximately 10-30 minutes until grout has thickened and become opaque. Carry out an initial clean of the tile surface with a damp sponge. Working in small areas of 1m², spray Instant Remover evenly over the surface and leave for 2 minutes. Clean using a damp sponge.


Initial Clean (After 30 minutes of grouting)

For removal of cementitious residues after 30 minutes of grouting use Fila First Wash Extra Strong.


Directions for use: Dilute 1:5 in clean water and spread the solution over the tiles with a cloth. Leave to act for 5 minutes. Using a green emulsifying pad work the solution over the surface. Clean up the residue and rinse thoroughly with plenty of clean water.


A second application maybe necessary to remove any existing residue


This product should not be used neat as the dilution with water activates the ingredients of the cleaner. Always perform a test in a small portion of the surface to verify the acid resistance of the surface.


For removal of epoxy residues use Fila Tile & Stone Stain Remover.


Directions for use: Apply Fila Tile & Stone Stain Remover undiluted to the surface of the tiles with a cloth. Leave to act for 20 minutes then using an abrasive sponge work the solution over the surface. Clean up the residue and rinse with plenty of clean water.


Do not use on polished Natural Stone, Wood, Acrylic or Plastic surfaces.


Routine Maintenance

It is important to regularly maintain the surface of your tiles to prevent the build-up of deposits, to do this use our pH neutral Fila Tile & Stone Cleaner.


Directions for use: Dilute 2 capfuls in to 4 litres of clean water. Apply to the surface and leave to dry; no need to rinse. Covers 100m2 of wall or floor surfaces.


To maintain the life of your grout use Fila Grout Protector.


Directions for use: Once grout is completely dry apply the product directly to the grout joint, if using the spray hold the bottle approximately 10-15cm away from the surface area.

Working in small areas (1m2), use a sponge or brush to aid the products penetration over the grout lines. Remove any excess product or smears from the tiles within a 5 minute period using a clean cloth or kitchen roll. Any dry residues that were not removed during application can be removed with Fila Tile & Stone Cleaner.


Chat Online 编辑模式下无法使用
Chat Online inputting...
<---数据专家代码--->