Home  > INFORMATIONS  > News  > 

Need to Tile Over Vinyl?

Need to Tile Over Vinyl?


Installing a new floor can be a big do-it-yourself task. Even if you’re DIY-minded, updating your kitchen, family room or a bathroom can be a large project to embark on. Even a small powder room, entry area or mudroom can be a lot of work if you’re going to be tackling it alone or with the help of friends and family members.

One possible way to make this job faster and easier is to tile over vinyl or linoleum without removing your existing flooring first. While this can be done, you’ll have to evaluate your floors to see if it’s a possibility for you and your home.

Evaluate Your Vinyl

Installing tile on top of existing vinyl flooring can be a big time saver. To do this effectively though, your floors have to be in good shape. Here are a few things to look for when evaluating your vinyl to see if it can be left in place:

Is it buckling or curling?

This is common around the walls and edges of a vinyl floor, particularly as the material gets older. Buckled or curled vinyl does not make a solid, stable surface for a new tile floor.

What about tears?

Like buckled and curled edges, tears in your vinyl flooring are a sign of wear. You may be able to fill these tears before installing new marble floor tile but in many cases, removing the old vinyl flooring is preferable.

What’s it made of?

Old vinyl and linoleum floors can contain problematic materials like asbestos. If this is the case, you’ll likely want to have this material removed completely by professionals or leave it in place. You can’t score or sand vinyl or linoleum with asbestos for proper adherence of your new tile floor.

It’s important to note that certain types of resilient flooring make poor underlayment for any type of premium porcelain tile. These include perimeter-bond sheet vinyl, which may shift over time, and vinyl or linoleum with a cushioned structure that can become unstable.

Luxury vinyl planks shouldn’t be tiled over either since they are installed in a floating fashion without any type of adhesive. That means that the layer of luxury vinyl under your tile floors can shift over time, leading to potential cracks in your grout.

How’s Your Subfloor?

You’ve evaluated your existing flooring and it looks good without tears, cracks or buckled spots. It’s new enough that it doesn’t contain asbestos. It might seem counter-intuitive, but evaluating your subfloor is the next step.

radiant heat flooring

You need to do this because your subfloor must now carry the additional weight of tile on top of your existing flooring if you don’t plan to remove it. This is especially important with heavy tile materials like slate, granite or marble.

For the best installation results, you want a subfloor that has minimal flexing and deflection. You’ll want to check for obvious signs of damage as well. These can be repaired to provide extra support.

Soft or thin subfloors will also need to be repaired or bolstered with additional plywood. If you skip this step you could find that your tile and grout joints crack over time once your new tile is in place.

How Hard is Removing Your Vinyl?

tile over vinyl

Your existing flooring looks good and your subfloor seems plenty durable and capable of supporting the weight of porcelain, ceramic or natural stone tile. That means you’re ready to get to work, right? There is one more consideration to keep in mind.

How hard would it be to remove your existing vinyl flooring? If the job looks relatively easy or you’re dealing with a small space like a powder room, there are a few reasons to consider removal before putting down tile.

One of the main reasons is that your floors may be too high once you install your tile flooring. While vinyl and linoleum tend to be very thin – almost always under 12mm – this can raise the overall level of your finished floors. Extra height may be a particular concern if you plan to use extra underlayment like plywood and backer board over your existing vinyl.

tile over vinyl

Removing your existing vinyl also changes the type of work that you have to do, and in some cases, this may be preferable. When working on top of existing flooring, you’ll need to first clean and thoroughly sand it. This can be time-consuming work, particularly if you have a large floor to sand.

You may also need to repair certain parts of the floor by removing bulging or damaged spots before you begin. Even floors in good shape can have bulges or spots that need to be addressed before you can begin work. You may not notice these until you’re up close and personal with your existing vinyl or linoleum.

Chat Online 编辑模式下无法使用
Chat Online inputting...