About the beauty of the building external wall ceramic tile
rendering seam an agent construction, many owners may not be familiar with, small make up recently happened to awareness of some of the beauty of the building external wall ceramic tile
rendering seam an agent construction materials, for everyone here to introduce about the beauty of the building external wall ceramic tile rendering seam an agent construction experience, hope to be able to help you.
Ceramic tile seam an agent construction step 1, tool preparation in the United States: glue guns, wallpaper knife, silicone scraper, small bucket, textured paper;
2, choose the color of the beauty of ceramic tile seam an agent: in general, is a customer according to his be fond of;
3, the operation steps: beauty in ceramic tile seam an agent bottle poke a hole, and then twist on the discharging mouth, then discharging mouth with a wallpaper knife cut into a 45 degree Angle, ceramic tile seam is less than 2 mm, the front end of the discharging mouth with wallpaper knife cut out the slope Angle;
Ceramic tile seam is greater than 2 mm, to pare off a slightly more;
Discharging mouth mouth width should be less than seam width, in order to make sure no material overflow;
4, construction methods: (
Play after clean up the scene, and then use wallpaper knife in ceramic tile seam and on both sides of the filler is clean, the ground is not allowed to have a floating dust;
Sew sponge in water rapidly wipe the ceramic tile, make sure no dust, with a glue gun material evenly in brick joints, about 1 meter, plug the discharging mouth;
With silica gel plate will scrape to evenness immediately, on both sides of the brick seam overflow a small amount of material, with a slightly damp sponge wiped, brush a few times more, often should rinse the sponge;
Such an area from start playing again after you again the second time, to ensure construction quality.
5, construction quality standard: to do can't smooth edge, there can be no bubbles, there can be little hole, the bricks are not allowed to have more material overflow, leave before the ground clean like new.
6, if the customer again afraid his construction material overflow on the surface of the brick to wipe not net, that can be used to post on the edge of the tile seam crepe paper, and then with a glue gun, use after leveling, material such as dry, after repair can be uncovered crepe paper.
Beauty of ceramic tile seam an agent construction note 1, after the paste ceramic tile, ceramic tile and the crack surface is clean, dry dust, use this product fill again.
2, 3 with open aluminum bottles with good thing, will tighten on the aluminum bottle mouth.
4, along the material mouth with a knife cut into a 45 degree Angle at the top of the concave and convex, the material mouth slightly smaller than the width of a brick, because the sizes and brick joints when handling material width depending on the specific situation.
5, pull open the TAB at the bottom of the seam an agent.
The beautiful seam an agent into glue gun, glue gun material evenly into the brick.
6, a finger or blade will be smooth.
7, with a damp sponge to excess material on the surface of the ceramic tile is clean.
8, two hours after the completion of construction surface curing, two days later can be normal use.
Above is small make up to you about the beauty of the building external wall ceramic tile rendering of the seam an agent construction of some of the data, you if there is any doubt to query out also can log on our website.
Overland ceramics allocates customer service resources to the platform where their customers are most vocal.
Guangdong Overland Ceramics Co., Ltd aligns itself with customers as partners to assist them in achieving their goals and objectives.
Guangdong Overland Ceramics Co., Ltd knew the only way to remain competitive was to ensure quality of service and customer satisfaction above all.